Painting Of Interiors: How To Avoid Mistakes?

Suppose you are going to update the appearance of your interior independently. In that case, you are doing it for the first time, and you do not have enough experience, then before proceeding with the actions, read the useful tips. They will help you avoid mistakes, save you money, and valuable time.

 

Latex or oily

 

Interior paints are either latex or alkyd oil. Most oil paints contain synthetic alkyd resins, which have proven themselves better than paints based on natural oils. Each of them has different characteristics and application features.

 

You can consult with a dealer to help you select the most suitable paint for your specific project.

 

Latex paint creates a more durable finish with excellent gloss retention. Sherwin-Williams latex paints are easy to work with, dry quickly on surfaces, and are extremely durable. Latex-based paints are easy to clean with soap and water.

 

Oil-based alkyd paints have good adhesion, high strength, and resistance to contamination. These paints are an excellent choice for commonly used areas such as kitchens and bathrooms. The instrument is cleaned with white spirit.

 

Matching paint and surface

 

The choice of paint suitable for a specific surface is an important stage in the preparation and will help to reveal all the positive properties of the selected material.

 

Ceiling – Use a specially formulated matte ceiling paint. Matte paint hides surface irregularities and unevenness with varying degrees of staining. Ceiling paint hardly sprinkles from the roller and does not turn yellow over time.

 

Woodwork – Use latex or alkyd paint. Always prime bare wood before painting. For wooden surfaces, a semi-gloss paint should be advised first. It will be easier to remove dirt from such a surface in the future. But if this factor is not so important, then matte (flat) and satin (satin) paints can also be quite good.

 

Walls – Latex paints are great here, which can be easily applied by anyone without experience. Latex paints can be applied to properly primed drywall, wood, and brickwork.

 

Metal – Iron and steel surfaces must be pre-primed when using both latex and alkyd paints. Latex paints can be applied directly without primer to aluminum and galvanized metal. However, these metals must be properly primed if you are using oil-based alkyd paints.

 

Brick & Concrete – There are specially formulated concrete base paints for masonry, cement blocks, and concrete.

 

Flooring – Use products specially formulated for flooring that can withstand abrasion, constant exposure, and frequent cleaning.

Leave a Comment

Your email address will not be published. Required fields are marked *