The best interior wall paints need to be properly coated onto already prepared surfaces to reduce coats. But please beware when choosing inexpensive paints that promise great coverage at good prices, too good to be true.

Two ways to ensure your paint project’s success is to prepare the surface properly before painting and take your time.

Choose the Right Wall Painting Tools

The right tools are important. Here’s what you need:

High-quality roller and handle can be used:

  • 3/8 ” roller for most finishes
  • 1/4 ” high gloss roller
  • thicker 1 / 2- or 3/4-inch bushing for rougher textured walls

Wash and dry the roller before use to remove any excess fibers before painting

Other painting tools you will need include a paint tray, extension bar, and a ladder.

 

Prepare the wall surface.

When preparing a room for a successful painting, it is always important to start with cleaning. Most walls can be washed with a sponge and warm water. If there is mold, be sure to remove it completely with a special solution. A primer is also required.

Cover non-painted surfaces with masking tape

Before painting a room, cover the surfaces with masking tape to avoid painting unnecessary parts such as ceiling lines, corners, windows, doors, moldings, sockets, and switches.

Submerge your roller in the paint tray

Place the liner in the paint tray and carefully pour the paint into the tray. Begin submerging your roller by rolling it along the raised area of ​​the tub.

 Soak the roller and avoid streaking.

Each time you reload the cutscene, start a new row in the unpainted area and return to the previously painted row. The extension should be long enough to comfortably reach the highest and lowest points of the wall.

Painting the walls without wiring is one of the important techniques for mastering; start by not covering too much space in one go. Painting appropriately sized areas will help you maintain a “wet edge” – applying paint to the unpainted area and then back to the freshly painted surface – ultimately providing a smooth, even look, and helping prevent roller marks.

Let dry, paint and let dry again

Test the paint for the recommended drying time and let it dry completely before adding a second coat. Ensure you keep the correct cure times before placing lights, wall panels, or frames on the walls.…


When choosing a method of wall decoration, preference is increasingly given to painting. Traditional painted walls are the perfect backdrop for both modern minimalism and vintage decor. However, when working with paint, you can be creative by combining colors and shades. Some color combinations will bring the crazy pop-art energy to the interior; others will help create a harmonious backdrop for a luxurious classic interior.

Austin painters believes it is generally accepted that painted walls, in contrast to those covered with wallpaper, look dull and uninteresting. It’s a delusion! First, the paint can be tinted in absolutely any color. With wallpaper, there is no such freedom: what designers have created, you have to use. Secondly, paint can be combined with stunning effects.

Combining painting is not so easy. You will have to work very carefully. It is necessary to purchase a good masking tape, which protects the surface from paint and can also be easily removed from it without pulling the finishing layer. Also, painting in two colors will require accurate calculations, measurements, and markings. Patience is also required because some staining methods can take several days (step-by-step staining).

How to paint walls in two, three, or four colors? There are several popular combinations of paint designs. When choosing, you need to take into account the style of the future interior, the features of the layout of the room, and personal preferences. So, let’s look at the basic techniques for painting walls in several colors but first, about some important nuances.

Wall design options in two colors

Painting walls with paint is becoming an increasingly popular form of decoration. Factory wallpapers do not allow you to customize your home. And then the time comes to think about what color to paint the walls of the room. If you want to experiment with interesting combinations, try painting the walls in two colors, but remember – this is a lengthy process that requires precise calculations and markings. But the effect obtained will justify all the difficulties. This design will be appropriate both in the kitchen and in the nursery.

  • What to consider when dyeing combined
  • Affordable and interesting coloring options
  • Horizontal division
  • Imitation panels
  • Accent on one wall
  • Solid horizontal line
  • Striped wall
  • Painting geometric structures
  • Using complex shapes
  • Peas
  • Kitchen decoration

Stripes on the walls

Using two or three tones of paint, you can turn a plain wall into a striped one. It should be said that this work is very meticulous, but the result is worth it.

It is easier to apply wide stripes: less fiddling with tape and not many blots. Also, wide stripes look softer and more unobtrusive.

The combined striped color can be used not for all walls, but to create accent fragments.…


Suppose you are going to update the appearance of your interior independently. In that case, you are doing it for the first time, and you do not have enough experience, then before proceeding with the actions, read the useful tips. They will help you avoid mistakes, save you money, and valuable time.

 

Latex or oily

 

Interior paints are either latex or alkyd oil. Most oil paints contain synthetic alkyd resins, which have proven themselves better than paints based on natural oils. Each of them has different characteristics and application features.

 

You can consult with a dealer to help you select the most suitable paint for your specific project.

 

Latex paint creates a more durable finish with excellent gloss retention. Sherwin-Williams latex paints are easy to work with, dry quickly on surfaces, and are extremely durable. Latex-based paints are easy to clean with soap and water.

 

Oil-based alkyd paints have good adhesion, high strength, and resistance to contamination. These paints are an excellent choice for commonly used areas such as kitchens and bathrooms. The instrument is cleaned with white spirit.

 

Matching paint and surface

 

The choice of paint suitable for a specific surface is an important stage in the preparation and will help to reveal all the positive properties of the selected material.

 

Ceiling – Use a specially formulated matte ceiling paint. Matte paint hides surface irregularities and unevenness with varying degrees of staining. Ceiling paint hardly sprinkles from the roller and does not turn yellow over time.

 

Woodwork – Use latex or alkyd paint. Always prime bare wood before painting. For wooden surfaces, a semi-gloss paint should be advised first. It will be easier to remove dirt from such a surface in the future. But if this factor is not so important, then matte (flat) and satin (satin) paints can also be quite good.

 

Walls – Latex paints are great here, which can be easily applied by anyone without experience. Latex paints can be applied to properly primed drywall, wood, and brickwork.

 

Metal – Iron and steel surfaces must be pre-primed when using both latex and alkyd paints. Latex paints can be applied directly without primer to aluminum and galvanized metal. However, these metals must be properly primed if you are using oil-based alkyd paints.

 

Brick & Concrete – There are specially formulated concrete base paints for masonry, cement blocks, and concrete.

 

Flooring – Use products specially formulated for flooring that can withstand abrasion, constant exposure, and frequent cleaning.